|

 

|
|
- FLOOR
SYSTEMS
Wood floor option (when specified instead of slab) is an
“I” joist system at a minimum of 16” OC,
blocked over supports and ¾” plywood subfloor
and glue. This system is also used for two story homes.
Girder post and vents are also included. Optional wood floor
package based on level lot. /8” particle board supplied
for all vinyl areas in either single or two story homes.
- WALL
FRAMING
Materials for exterior partitions are: 2x6 studs, 16”
OC for all exterior and plumbing walls, and 2x4 studs, 16”
OC for interior partitions. Plates are double top plates
with single pressure treated bottom plate for the standard
slab package. All openings are enclosed by two full length
studs and two full length trimmers with headers and bearing
walls. Metal strap bracing is provided where required. 2x4
plumb and align material is furnished for temporary bracing.
Standard height walls are assembled at the Endeavor Plant.
- SIDING
AND TRIM
Sidings per plan are 5/8” Duratemp plywood composite
board with T-1-1 I pattern and ½” TruWood lap
siding in a rough sawn textured finish. (Hardiplank is an
available upgrade option). Homes using lap siding may require
shear paneling (3/8” CDX plywood or Thermoply). House
wrap is provided on all homes. The exterior trim, fascia
and barges are select SPF resawn lumber. Exterior trim may
be a 6/4 composite material.
- ROOFS
Roof systems are prefabricated trusses at 24” OC 1x4
and 2x4 bracing is provided. Roof pitches are 4/12 or greater.
Roof sheathing is ½” CDX plywood with ½
CCX plywood overhang. Roofing material supplied is 30-year
dimensional shingles with 15 pound underlayment felt. (40
year, 50 year dimensional shingles and metal roofing are
available upgrade options. Nails, rain gutters, flashing
and valleys are also included. Porch soffits will be 5/8”
composite material.
- HARDWARE
AND SHEET METAL ITEMS:
- Foundation
vents for garage and house
- Dryer
vent
- Hardware
ties where required
- Caulking
necessary for windows – siding- sinks
- Nails
necessary to frame and trim
- WINDOWS:
Several of our standard packages come with vinyl garden
windows, vinyl dual glazed window system for the remainder
of the house, and one vinyl dual glazed patio door. Windows
are slider type complete with screens and sisalcraft flashing
paper. (Gridded windows and single hung windows are available
upgrade option.)
- STAIRS:
For two-story homes stringer material is 2x12 Douglas fir.
Stair treads are 1 1/8” composite, beveled material.
Risers are 1x8” Douglas fir.
- GARAGE
DOORS:
Homes with garages are furnished with complete overhead
steel sectional roll up garage door, 16’x7’,
for two car units and 8’x7’ for single car units
with hardware and garage jambs.
- ELECTRICAL:
The electrical items needed to wire your home, such as 200
amp panel box, breakers, wires, receptacles, switches, face
plates, stud and ceiling boxes and all other materials to
complete the job, are included, according to the electrical
plan.
- DOORS,
INTERIOR TRIM, AND BATH HARDWARE:
- Prehung
entry door, 3’0”x1-3/4”, raised panel,
mortised and drilled. (Wood or steel doors are available
upgrade options.)
- Knocked-down,
hollow core, interior mahogany doors. (Raised panel
Masonite doors is an available upgrade option.)
- Shelves,
poles, hook packages, and sliding doors for closets.
- Paint
grade casing for doors and stools for windows.
- MDF
baseboard for finished rooms.
- Dead
bolts for front doors.
- Complete
hardware for all doors.
- Weather
stripping and threshold for exterior doors.
- Doorsteps.
- One
chrome shower rod, one chrome towel bar and paper holder
per bathroom.
- Stainless
steel double sink for kitchen with cast iron as an available
upgrade option.
- INSULATION:
Insulation batts with vapor barrier attached are provided
as follows: R:19 – Wood Flooring; R:19– Walls;
R:30 – Ceiling. (R:21 and R:38 are available upgrade
options.)
- SHEETROCK:
½” drywall is furnished for all interior walls
5/8” type-X wallboard is furnished for all ceilings
and firewall between house and garage. Appropriate finishing
materials, such a tape, metal corners,* (bullnose corners
are an available upgrade option), premixed mud and topping
are included.
- PAINT:
Interior latex flat is provided for the interior walls,
enamel undercoat and enamel paint are included for the kitchen
and baths only. Also furnished is the paint for the exterior
siding, overhang, and trim. Stain is provided to finish
interior and exterior doors.
- LIGHT
FIXTURES:
Decorative light fixtures are provided as per plan. Also
included is an approved wired smoke detector system, a front
door bell and button, and exhaust fan for bathroom, when
needed.
- BATH
FIXTURES:
Medicine cabinets, toilets, fiberglass shower and tubs,
mirrors, tub and sink faucets, and shower heads are included.
- APPLIANCES:
-
Self-cleaning, free-standing ranger (electric or gas)
- Range
hood
- Dishwasher
- Garbage
disposal
- Water
heater – 40 gallon gas or 40 gallon electric
- Island
or drop-in self cleaning ranges are available upgrade
options
- CABINETS:
*Each plan includes installed prefinished oak cabinets with
Formica counter tops in the kitchen, bathrooms, and slip-in
linen cabinets where noted. Cabinets come with melamine
interiors. (All models except “Austin” come
with cultured marbletops with formed sink in bathrooms.)
- HEATING
AND AIR CONDITIONING:
*A custom designed heating and air conditioning system is
provided which includes a heat pump or gas pack, ducts,
registers, return air grill and thermostat; this is installed
at no extra charge. Optional prices can be quoted for wall
heaters.
- FLOOR
COVERINGS:
Carpet and ½” pad is furnished for all rooms
except kitchen, entry and baths where vinyl is provided.
*
Endeavor Homes is not a licensed contractor but employs
licensed contractors for the installation of heat and air
conditioning, cabinets, and counter tops.
**Except “Austin” Model
|
|
|